Sunday, October 6, 2019
Compare and contrast between the philosophical thoughts of Booker T Essay - 2
Compare and contrast between the philosophical thoughts of Booker T. Washington and W. E. B. Dubois - Essay Example An educator, Washington believed that blacks should stabilize their future by becoming indispensable members in the society. The only way to become indispensable in the society is by providing a necessity to the society through education. Washingtonââ¬â¢s early childhood was in slavery forcing him to seek industrial education at Hampton. Washington was a strong supporter on industrial education. Most of Washingtonââ¬â¢s philosophies were familiar with the southern blacks because he came from the south. Washington believes that the black community should not agitate for voting and civil rights not only for economic gains and security, but they should also fight for anti-black violence (Karenga 154). Washingtonââ¬â¢s popularity also increased among the northern whites and later, among the southern whites who perceived the philosophies as complete surrender and self-uplift. Most of Washingtonââ¬â¢s philosophies were based on prior experience with slavery On the contrary, W.E. DuBois grew up in a slavery-free society in the north. DuBois did not experience the harsh realities of slavery or prejudice present in the south. DuBois grew in a predominantly white environment. Unlike Washington, DuBois felt that the equality between the white community and the African Americans was the most important thing. More politically militant than Washington, DuBois aired his political view through political movements, associations, and political magazines. DuBois felt believed that black people should get the same liberal education the white community gets. As such DuBois ideas regarding education were crucial in shaping education among African American people (Rabaka 735). The biggest philosophical disagreement between the two leaders regarded black suffrage. Regarding voting, DuBois supported the agitation for the ballot and opposed voting among uneducated black people. According to DuBois, economic gains were not important without
Friday, October 4, 2019
Vail-Colorado Research Paper Example | Topics and Well Written Essays - 2000 words
Vail-Colorado - Research Paper Example In 1992 Apollo Partners purchased Vail Associates, which in turn became Vail Resorts Inc., which was followed by the acquisition of ski resorts Keystone and Breckenridge. The acquisition of these ski resorts was a major change that helped Vail succeed in the long run by appealing to a broader market. Both Keystone and Breckenridge have lower prices than Vail Mountain, and attract more single- and college-aged customers (Vail Resorts). The company then added the Real Estate segment which comprised 6 percent of the company's total revenues in 2004. Mountain revenues account for 69 percent, and revenues from lodging activities account for the remaining 25 percent. Having these additional revenues allowed Vail to establish itself and provide a greater level of customization to its guests. Owning a house on the mountain allowed skiers to visit more frequently during the winter season, as well as have a getaway during the summer season (Vail Resorts). Vail owns four different ski resorts in Colorado, a resort in Lake Tahoe California, as well as a summer resort in Grand Teton. Along with these six resorts, Vail owns Rock Resorts which is a management company that "manages 10 luxury resort hotels across the United States" (Vail Resorts). Vail Resorts offers a complete package to the vacationer of all ages... The majority of Vail Resort's visitors are there for the challenging ski terrain and the top quality service. Vail offers some of the most challenging ski terrain Colorado has and offers instructional courses for beginning to expert skiers. Select resorts have begun offering instructional ski lessons for select individuals. Classes such as: over the age of 50 only, female only, and kids Ski Zone packages have been implemented to provide the skier a more comfortable learning experience. They have recently started to offer amenities that fit the eye of the snowboarders dream. Many of the resort now offer snowboarder parks that include rails, pipes, jumps, terrain parks, and much more. For the person that prefers not to ski for the day, other activities are offered that allow them to enjoy the great outdoors without hitting the slopes. Activities such as ice skating, tubing, ski biking, snowshoeing, snowmobile tours, hiking trails, golf courses, hot-air balloon rides, and even a kid's s nowmobile racetrack has been added to the list for the visitor's pleasure. (Snow, 2005) Many indoor activities are offered at Vail Resorts as well. The most enjoyable indoor attraction is the many shopping areas the various resorts have to offer. There is a variety of shops where you can find gifts, souvenirs, jewelry, art, clothing, and much more. Other activities Vail Resorts offer will include museums, comedy shows, health spas, amphitheaters, arcades, indoor ice skating, bowling, and a variety of night clubs and bars. (Snow, 2005) Vail Resorts targets the consumer that trends more towards the upper class in society. These customers are willing and able to pay the top price in the industry to get
Qualities that a ââ¬Ëgoodââ¬â¢ teacher should have Essay Example for Free
Qualities that a ââ¬Ëgoodââ¬â¢ teacher should have Essay Task 1 ââ¬â List 5 qualities that a ââ¬Ëgoodââ¬â¢ teacher should have and give reasons for your choices. Which of these qualities do you consider to be more important, and why? 1. a good teacher should really love teaching because in my opinion you cannot be a good teacher if you do not like what you do. 2. a good teacher should be lively and entertaining because children do not like boring teachers, they need somebody who changes learning into pleasure. as my experience schooled children love games and it is one of the best way of encouraging them to take part in the lesson. 3. a good teacher is able to motivate learners as motivation is one of the most important aspects while learning. children who are well motivated are eager to learn thus they learn more. 4. a good teacher should have good rapport and interaction with the class because it is crucial to have a nice atmosphere in the classroom. I believe that children cannot be scared of the teacher, they must like him/her and then they are open and more involved in the lessons. 5. a good teacher should be able to correct student without offending them or affecting their motivation as if he/she does it then the children do not want to take part in the lessons because they are scared of making mistakes. i always tell my students that they shouldnt be scared of making mistakes as nobody is perfect and Im there to correct them. and explain that they are learners so they cant know all of the answers correctly. As far as I am concerned, I really believe that all of the qualities I chose are equal. you really need to have all of them to be a good teacher. it is really difficult for me to decide which one is more important and which one is less important. Task 2 ââ¬â State what you consider to be the five most important roles of a teacher. Describe each role and say why you think it is important. 1. organizer teacher organizes to do various activities. it is important as children need instruction, need to be organized into groups or pairs. teacher must initiate and finish activities and give feedback. 2. participant teacher participates in the lesson as an equal. it is goodà method as children can see that the teacher wants to be a part of the class so it is a good way of gaining trust. 3. observer teacher monitors what is going on in the classroom. it is important as teacher must know the improvement of the students and what needs to be revise. 4. model teacher (native speaker) is the source of real, live English. it is important because sometimes it is the only way for the students to encounter foreign language with foreign accent. native speaker is also a good source of cultural information. 5. assessor teacher gives feedback, correction, evaluates and grades. children want to know whether they make mistakes or not, as they want to improve their skills and try not to make the same mistake again. Task 3 ââ¬â List 5 qualities you would expect to find in a ââ¬Ëgoodââ¬â¢ learner. Which of these qualities do you consider to be more important, and why? 1. a desire to learn it is crucial to want to learn a language as if the students find learning language useless they simply dont want to take part in any activities and they dont want to study. 2. a willingness to ask questions students must ask questions as it is the way of finding more information and also practise their speaking skills. 3. a willingness to listen to the language listening to the language can improve not only listening but also speaking skills. it also helps to gain foreign accent. 4. an ability to think about their own learning process and methods every students is different and prefers different methods of learning. it is important for students to realize which method is the most helpful and useful for them while learning language. 5. an acceptance of error correction students must realize that when teacher corrects them he/she does it not to embarrass them but to improve their learning. students should try not to make the same mistakes over and over again. Task 4 ââ¬â What are some of the major differences you would expect to find between adult and young learners? Young learners are sometimes less motivated than adults. what is more, young learners are more receptive to the new sounds and grammar. it is widely known that young learners can acquire foreign language faster than adults.à adults has longer history of learning experience than young learners, and they believe they can succeed with the language. Task 5 ââ¬â List the levels of language ability that learners are often grouped into and give a brief summation of each level: beginner from zero knowledge of English to a very basic one which cannot be quickly or easily activated. elementary students are able to form basic sentence structures and communicate on simple topics. low/pre-intermediate able to communicate and understand a great variety of topics but lacking general fluency and depth of language awareness. still likely to make many errors even with basic structures. intermediate able to understand and communicate on a wide range of issues using limited vocabulary store but still lacking in accuracy and fluency. upper intermediate should be able to actively communicate on almost all topics using a great range of language but still lacking in accuracy. advanced students should have a very good knowledge of the English language and now will be studying more suitable language items. Task 6 ââ¬â Give as many reasons as possible why students are motivated to study English. The reasons that you give do not have to be in the unit reading material. students are motivated to study English because they realize that English is an international language and you can communicate with almost everyobody all over the world using this language. they know English can improve their future career prospects. they realize it can make their travel abroad much easier. they also want to study English to improve their grades and achieve success in exams. they study because they want to communicate with prints, parents, colleagues. very often they just want to learn language because they are interested in English and English culture.
Thursday, October 3, 2019
Milling machines: An introduction
Milling machines: An introduction Chapter I 1.1 Introduction The ability of any nation to manufacture is essential but to deploy that ability in a certain nation is the trick as every nation defers from one another, so in order to enhance Arab nation ability to manufacture we will provide a better cheaper design for a CNC milling machine. The Primary Objective of This Project is to present and develop a prototype for a substitution of the expensive hard to acquire machining facility for the Middle East industrial society; these machining facilities include the regular Turning, Drilling, Shaping, Milling, and Grinding Machines. Our primary survey concluded that there always must be a turning machine beside a milling machine, but a milling machine (CNC milling machine) can include the rest of processes required within its operation to a good degree and the turning operation to an acceptable degree. So we chose the milling machine as our initial model to undergo our optimization plan. Therefore our Primary objective of choice is to Design a Basic Three Axis CNC milling machine. Also to manufacture a working Prototype for this machine fabricated all with nationally available components in order to minimize its cost but maintains an acceptable level of accuracy to suite a Computer Numerical Control Machine. Another Thing that we must point out is that in order to accomplish this project we need more than one trial to find the suitable combination of components and specs to pursue in order that this machine comes to light. 1.2 Proposed Approach A new approach is needed that approach is based upon the 2010-2015 World Outlook for Computer Numerical Controls [1]. The results of that survey were mainly based upon word wide research includes Middle East and North Africa. These results showed that any machine tool required for the Egyptian industrial society could be one of the following: Turning, Drilling, Shaping, Milling, and Grinding. So the first step was to pick up the operation over which this thesis will focus on. Milling can include in its operation: Drilling, Shaping, and Grinding. And might contain Turning under certain conditions. So milling was chosen. And this result might be verified by the fact that 90% of the working machine tools in the field of traditional CNC machines are either Milling or Turning Centers. Now we will compare different configuration of milling machines Case 1: A Universal Milling Machine. Case 2: A regular CNC Milling Machine. Case 3: Gantry style CNC Milling Machine. Case 1: A Universal Milling Machine From Cost point of view: Cost is high because of the usage of large material to build the bulky parts of the machine tool might be as high as a CNC Milling Machine From Design point of view: Design level might be considered low compared with the design required in both the regular CNC machine and our machine. From Accuracy Point of view: Accuracy is very low compared to the other two cases but could be difficulty approached with the use of very skilled labor and with high cost. Case 2: A regular CNC machine From Cost Point of view: Cost is much higher because of the usage of both large material amounts with high machining grade as will as the cost of the motion control equipments. From Design Point of view: Design is better than the first case for every part is designed to enhance the entire machining operation. From Accuracy Point of view: Attained accuracy is very high due to perfect guide ways assisted by ball screws along with feed back control. Case 3: A gantry CNC milling machine From Cost Point of view: Cost is mush less than the later case and might be less that the first case as the entire machine is only build from a metal sheet and some Bars. From Design Point of view: Design is much sophisticated than the first and the second case as the design is optimized to hold the predetermined forces as a light weight structure. From Accuracy Point of view: Accuracy is for sure less than the second case but higher than the first case as there is no feedback control technique employed. Discussion of results: For case 1: Universal Milling Machine Our results dont imply that the use of that machine is not appropriate but we only mean that each application requires a certain machine and also each goal. The cost is very high in EGYPT as almost all of them is imported but not made in EGYPT but there maintenance and overhauling is available domestically. For Case 2: three axis CNC milling machine Vertical Column type. The usage of this type of machines in any workshop requires a great deal of money so most of the manufacturers comprises between money and accuracy. The cost is definitely much higher as there is almost no one building or even providing maintenance for these machines in EGYPT. For Case 3: Gantry style CNC milling machine. The usage of this machine is aimed to workshops who would like to get both cheap machining with good accuracy. The cost is very low as of the innovative design of putting the entire axis moving over each other rather than independent from each other as in the regular design of any CNC machine Chapter II Literature Review 2.1 Milling Machine Milling is the process of machining flat, curved, or irregular surfaces by feeding the work piece against a rotating cutter containing a number of cutting edges. The milling machine consists basically of a motor driven spindle, which mounts and revolves the milling cutter, and a reciprocating adjustable worktable, which mounts and feeds the work piece. 2.1.2 Milling Machine History Unlike lathes, which have been known for thousands of years, milling machines are less than two hundred years old. Because they require much more power than hand-driven lathes, their introduction had to wait for the invention of industrial water and steam power. Also, all their mechanical components had to first be made available, such as accurately fitted slides, large castings to resist cutting forces, calibrated lead screws, and hardened steel cutting tools. Eli Whitney is credited with inventing the first milling machine about 1818, but the knee-and-column support arrangement of the universal milling machine of Joseph A. Brown (later of Brown and Sharpe) dates from 1862 and marks an important step in the machines development. During the last half of the nineteenth Century, milling machines gradually replaced shapers and planers which have lathe-type, single-point tool bits that move over the work in a straight line and scrape off metal one stroke at a time. Milling machines, with their continuous cutting action, not only remove metal faster than shapers and planers, they perform additional operations like cutting helices for gears and twist drills. Today, milling machines greatly outnumber shaping and planning machines. Americans in New England and later the Midwest continuously added features leading to the modern milling machine. Another important development came in the 1930s when Rudolph Bannow and Magnus Wahlstrom brought out the Bridgeport-style vertical milling machine. This design offers versatility and economy in place of the higher metal removal rates of traditional horizontal milling machines. Because of this versatility, there are more Bridgeport-style mills in existence today than any other milling machine design. Horizontal mills are now usually reserved for production applications where high metal removal rates on identical parts are needed, not prototyping and short runs. Bridgeport-style machines are also called knee-and-column machines and turret mills. For production applications, there are large, expensive milling machines with three or more axes under computer control. Some machines perform all operations including automatic tool changing. However, today there is an intermediate step between a manual mill and a fully automated one. Adding a computer, digital readouts, and actuators to the X- and Y-axes of a Bridgeport-style mill does this. Not only can this enhanced machine tirelessly perform all its existing repetitive functions, it also has added new capabilities. Now the mill can engrave (drive the tool to cut numbers and letters in various sizes and fonts), cut radii and angles without a rotary table, make islands, pockets, and cut ellipses, and frames. Entering the position, diameter and number of holes, automates cutting a bolt-hole pattern; the system does the math. The computer can automatically compensate for the reduced diameter of re sharp end milling cutters, saving time and money. The system can be manually programmed through its control panel, use stored programs, ââ¬Å"learnâ⬠new tasks by memorizing a series of manual operations as the operator makes the first part, or accept files from CAD programs. 2.1.1 Type of MILLING MACHINES Milling machine are classified on the base of the position of their spindle. The spindle operates in either a vertical or horizontal position or on base of construction. In a following section we represent the different type of milling machine. Column Knee-type Milling Machine Fig 2 machines are characterized by a vertically adjustable worktable resting on a saddle which is supported by a knee. The knee is a massive casting that rides vertically on the milling machine column and can be clamped rigidly to have column in a position where the milling head and milling machine spindle are properly adjusted for operation. The plain vertical column knee type machines are characterized by a spindle located vertically, parallel to the column face, and mounted in a sliding head that can be fed up and down by hand or power. Modern vertical milling machines are designed so the entire head can also swivel to permit working on angular surfaces. The plain horizontal milling machines column contains the drive motor and gearing and a fixed position horizontal milling machine spindle. An adjustable overhead arm containing one or more arbor supports projects forward from the top of the column. The arm and arbor supports are used to stabilize long arbors. Supports can be moved along the overhead arm to support the arbor where support is desired depending on the position of the milling cutter or cutters. UNIVERSAL MILLING MACHINE The basic difference between a universal milling machine and a plain column knee type milling machine is the addition of table swivel housing between the table and the saddle of the universal machine. This permits the table to swing up to 45à ° in either direction for angular and helical milling operations. The universal machine can be fitted with various attachments such as the indexing fixture, rotary table, slotting and rack cutting attachments, and various special fixtures. RAM-TYPE MILLING MACHINEThe ram-type milling machine is characterized by a spindle mounted to a movable housing on the column to permit positioning the milling cutter forward or rearward in a horizontal plane. Two popular ram-type milling machines are the universal milling machine and the swivel cutter head ram-type milling machine. Gantry Milling Machinefigure 5is simplest construction of milling machine is usually use in CNC machine for cutting wood plastic and light metal Rotary-Table Milling MachinesThese are also called continuous milling machines, as the work picas are set up without stopping the operation. Rotary-table machines are highly productive; consequently, they are frequently used for both batch and mass production. The Work prices being machined are clamped in fixtures installed on the rotating table (2) figure 6. The machines may be equipped with one or two spindle heads (1).When several surfaces are to be machined; the Work pieces are indexed in the fixtures after each complete revolution of the table. The machining cycle provides as many table revolutions as the number of surfaces to be machined. 2.1.2 MILLING CUTTERS The milling cutters are selected for each specified machining duty. The milling cutter may be provided with a hole to be mounted on the arbor of the horizontal milling machines, or provided with a straight or tapered shank for mounting on the vertical or horizontal milling machine. Figure 7 visualizes commonly used milling cutters during their operation. These include the following: Plain milling cutters are either straight or helical ones. Helical milling cutters are preferred for large cutting widths to provide smooth cutting and improved surface quality (Figure 7 a). Plain milling cutters are mainly used on horizontal milling machines. Face milling cutters are used for the production of horizontal (Figure 7 b), vertical (Figure 7 c), or inclined (Figure 7 d) at surfaces. They are used on vertical milling machines, planer type milling machines, and vertical milling machines with the spindle swiveled to the required angle. Side milling cutters are clamped on the arbor of the horizontal milling machine and are used for machining of the vertical surface of a shoulder (Figure 7 e) or cutting a keyway (Figure 7 f). Interlocking (staggered) side mills (Figure 7 g) mounted on the arbor of the horizontal milling machines are intended to cut wide keyways and cavities. Slitting saws (Figure 7 h) are used on horizontal milling machines. Angle milling cutters, used on horizontal milling machines, for the production of longitudinal grooves (Figure 7 I) or for edge chamfering. End mills are tools of a shank type, which can be mounted on vertical milling machines (or directly in the spindle nose of horizontal milling machines). End mills may be employed in machining keyways (Figure 7 j) or vertical surfaces (Figure 7 k). Key-cutters are also of the shank type that can be used on vertical milling machines. They may be used for single-pass milling or multi pass milling operations (Figures 7 l and 7 m). Form-milling cutters are mounted on horizontal milling machines. Form cutters may be either concave as shown in (Figure 7 n) or convex as in Figure (7 o). T-slot cutters are used for milling T-slots and are available in different sizes. The T-slot is machined on a vertical milling machine in two steps: 1-Slotting with end mill (Figure 7 j) 2-Cutting with T-slot cutter (Figure 7 p). Compound milling cutters are mainly used to produce compound surfaces. These cutters realize high productivity and accuracy (Figure 7 q). Inserted tool milling cutters have a main body that is fabricated from tough and less expensive steel. The teeth are made of alloy tool steel, HSS, carbides, ceramics, or cubic boron nitride (CBN) and mechanically attached to the body using set screws and in some cases are brazed. Cutters of this type are confined usually to large-diameter face milling cutters or horizontal milling cutters (Figure 7 q). Gear milling cutters are used for the production of spur and helical gears on vertical or horizontal milling machines (Figures 7 r and 7 s). Gear cutters are form-relieved cutters, which are used to mill contoured surfaces. They are sharpened at the tooth face. Hobbing machines and gear shapers are used to cut gears for mass production and high-accuracy demands. 2.1.3 Milling operation Milling is the removal of metal by feeding the work past a rotating multi toothed cutter. In this operation the material removal rate (MRR) is enhanced as the cutter rotates at a high cutting speed. The surface quality is also improved due to the multi cutting edges of the milling cutter. The action of the milling cutter is totally different from that of a drill or a turning tool. In turning and drilling, the tools are kept continuously in contact with the material to be cut, whereas milling is an intermittent process, as each tooth produces a chip of variable thickness. Milling operations may be classified as peripheral (plain) milling or face (end) milling (Figure 8). In peripheral milling, the cutting occurs by the teeth arranged on the periphery of the milling cutter, and the generated surface is a plane parallel to the cutter axis. Peripheral milling is usually performed on a horizontal milling machine. For this reason, it is sometimes called horizontal milling. The appearance of the surface and also the type of chip formation are affected by the direction of cutter rotation with respect to the movement of the WP. In this regard, two types of peripheral milling are differentiable, namely, up-milling and down-milling. Up-milling is accomplished by rotating the cutter against the direction of the feed of the WP (Figure 9 a). The tooth picks up from the material gradually; that is, the chip starts with no thickness and increases in size as the teeth progress through the cut. This means that the cycle of operation to remove the chip is first a sliding action at the beginning and then a crushing action takes place, which is followed by the actual cutting action. In some metals, up-milling leads to strain hardening of the machined surface, and also to chattering and excessive teeth blunting. Advantages of up-milling include the following: It does not require a backlash eliminator. It is safer in operation (the cutter does not climb on the work). Loads on teeth are acting gradually. Built-up edge (BUE) fragments are absent from the machined surface. The milling cutter is not affected by the sandy or scaly surfaces of the work. Down-Milling is accomplished by rotating the cutter in the direction of the work feed, as shown in Figure 9b. In climb milling, as implied by the name, the milling cutter attempts to climb the WP. Chips are cut to maximum thickness at initial engagement of cutter teeth with the work, and decrease to zero at the end of its engagement. The cutting forces in down milling are directed downward. Down-milling should not be attempted if machines do not have enough rigidity and are not provided with backlash eliminators. Under such circumstances, the cutter climbs up on the WP and the arbor and spindle may be damaged. Advantages of down-milling include the following: Fixtures are simpler and less costly, as cutting forces are acting downward. Flat WPs or plates that cannot be held can be machined by down-milling. Cutter with higher rake angles can be used, which decreases the power requirements. Tool blunting is less likely. Down-milling is characterized by fewer tendencies of chattering and vibration, which leads to improved surface finish. up milling down milling In face milling, the generated surface is at a right angle to the cutter axis. When using cutters of large diameters, it is a good practice to tilt the spindle head slightly at an angle of 13à ° to provide some clearance, which leads to an improved surface finish and eliminate tool blunting. Face milling is usually performed on vertical milling machines; for this reason, the process is called vertical milling, which is more productive than plain milling. 2.2 Computer Numerical Control The abbreviation CNC stands for computer numerical control, and refers specifically to a computer controller that reads G-code instructions and drives a machine tool, a powered mechanical device typically used to fabricate components by the selective removal of material. CNC does numerically directed interpolation of a cutting tool in the work envelope of a machine. The operating parameters of the CNC can be altered via a software load program. 2.2.1 Historical overview CNC was preceded by NC (Numerically Controlled) machines, which were hard wired and their operating parameters could not be changed. NC was developed in the late 1940s and early 1950s by John T. Parsons in collaboration with the MIT Servomechanisms Laboratory. The first CNC systems used NC style hardware, and the computer was used for the tool compensation calculations and sometimes for editing. Punched tape continued to be used as a medium for transferring G-codes into the controller for many decades after 1950, until it was eventually superseded by RS232 cables, floppy disks, and now is commonly tied directly into plant networks. The files containing the G-codes to be interpreted by the controller are usually saved under the .NC extension. Most shops have their own saving format that matches their ISO certification requirements. The introduction of CNC machines radically changed the manufacturing industry. Curves are as easy to cut as straight lines, complex 3-D structures are relatively easy to produce, and the number of machining steps that required human action has been dramatically reduced. With the increased automation of manufacturing processes with CNC machining, considerable improvements in consistency and quality have been achieved with no strain on the operator. CNC automation reduced the frequency of errors and provided CNC operators with time to perform additional tasks. CNC automation also allows for more flexibility in the way parts are held in the manufacturing process and the time required changing the machine to produce different components. 2.2.2 Production environment A series of CNC machines may be combined into one station, commonly called a cell, to progressively machine a part requiring several operations. CNC machines today are controlled directly from files created by CAM software packages, so that a part or assembly can go directly from design to manufacturing without the need of producing a drafted paper drawing of the manufactured component. In a sense, the CNC machines represent a special segment of industrial robot systems, as they are programmable to perform many kinds of machining operations (within their designed physical limits, like other robotic systems). CNC machines can run over night and over weekends without operator intervention. Error detection features have been developed, giving CNC machines the ability to call the operators mobile phone if it detects that a tool has broken. While the machine is awaiting replacement on the tool, it would run other parts it is already loaded with up to that tool and wait for the operator. T he ever changing intelligence of CNC controllers has dramatically increased job shop cell production. Some machines might even make 1000 parts on a weekend with no operator, checking each part with lasers and sensors. 2.2.3 CNC Components and Control System The two main components of a CNC machine are the machine tool and the machine control unit (MCU). The MCU is the computer that operates the machine tool. There are many manufacturers of these control units, so program codes may vary somewhat between machines. Figure 10 shows three types of control systems for NC and CNC machines. The least expensive type is called a point-to-point (PTP) control system. A PTP control system can only move a tool in a straight line and is limited to hole operations (drilling, boring, reaming, etc.) and spot welding. The tool path between points is not controllable in a PTP system. A straight-cut control system is capable of moving the cutting tools in a straight line between points. However, only one axis drive motor can move at one time, so arcs and angles are not possible. The contouring control system is the most expensive and flexible of the three systems. With the recent advances in electronics, the price difference between these systems has narrowed so much that every CNC machine is now manufactured with a contouring control system. A contouring system is capable of doing what the other systems can do while also being able to cut arcs and angles. 2.2.3 Positioning Formats A CNC program is written using the Cartesian coordinate system. The CNC tool can be moved inside the rectangular coordinates in either two or three dimensions. Lathes are programmed two-dimensionally using only the x- and y-axes, while milling machines are programmed three-dimensionally using the x-, y-, and z-axes. The z-axis is always the axis that determines the depth of cut. The x-axis is parallel to the longest length of the machine table, and the y-axis is parallel to the shortest length of the machine table. CNC programs can be written in one quadrant or four quadrants. CNC machines can be positioned in two ways with respect to the Cartesian coordinate system. They can be positioned in an absolute format or an incremental format. In the absolute format, all machine locations are taken from starting point (0, 0), which is referred to as the home position. In incremental format there are no assigned or home coordinates. The cutter tool bit moves in spaces (increments) relative to the coordinates previously listed. The absolute format is typically used for the main body of a CNC program. This allows the cutting tool to be given a home position to start and end its job. The incremental format is used in the middle of a program when a repetitious cycle (commonly referred to as a canned cycle) is needed. A canned cycle is a cutting pattern that can be programmed to repeat as many times as desired. It can reduce the size of a program tremendously, depending on the number of machining operations involved. The size of a program is reduced by a canned cycle because a programmer does not have to give the fixed coordinates of each move of the cutting tool. A programmer must only give the distance from each previous move of the cutter for one cycle. After that, a programmer merely has to list the number of times the cycle must be repeated. A programmer can also call up the canned cycle and use it again to do a similar machining operation in another part of the work piece. 2.2.4 CNC Programming Because of the added feature of a computers memory, CNC programming is a lot easier and simpler than conventional NC programming. Most CNC machines can be programmed using a standardized list of codes that were developed by the Electronics Industries Association (EIA), as shown in Table 1. These codes include preparatory functions or G codes. Some of these functions include cutting an arc in a clockwise direction (G02 circular interpolation) and telling the machine that the dimensions will be given in millimeters (G71-metric programming). 2.2.5 Task Flow in CNC The task flow that is needed for producing apart using a CNC machine can be summarizedas Fig.1.2.The tasks can be classified as the following three types: Offline tasks: CAD, CAPP, CAM. Online tasks: CNC machining, monitoring and On Machine Measurement. Post-line tasks: Computer Aided Inspection (CAI), post-operation. Offline tasks are the tasks that are needed to generate apart program for controlling a CNC machine. In the offline stage, after the shape of apart has been decided, a geometry model of this part is created by 2D or 3D CAD. In general, CAD means Computer Aided Design After finishing geometric modeling, Computer Aided Process Planning, CAPP, is carried out where necessary information for machining is generated. In this stage, the Selection of machine tools, tools, jig and fixture, decisions about cutting conditions, Scheduling and machining sequences are created. Because process planning is very Complicated and CAPP is immature with respect to technology, process planning generally depends on the know how of a process planner. CAM (Computer Aided Manufacturing) is executed in the final stage for generating apart program. In this stage, tool paths are generated based on geometry information from CAD and machining information from CAPP. During tool path generation, interferences between tool and work piece, minimization of machining time and tool change, and machine performance are considered .In particular; CAM is an essential tool to generate 2.5D or 3D tool paths for machine tools with more than three axes. Online tasks are those that are needed to machine parts using CNC machines. A part program, being the machine understandable instructions, can be generated in the above mentioned offline stage and part programs for a simple part can be directly edited in CNC by the user. In this stage, the CNC system reads and interprets part programs from memory and controls the movement of axes. The CNC system generates instructions for position and velocity control based on the part program and servo motors are controlled based on the instructions generated. As the rotation of a servo motor is transformed into linear movement via ball screw mechanisms, the work piece or tool is moved and finally, the part is machined by these movements. In the online stage, the status of the machine and machining process may be monitored during machining. Actually, tool breakage detection, compensation of thermal deformation, adaptive control, and compensation of tool defection based on monitoring of cutting force, heat, and electric current are applied during machining. On Machine Measurement is also used to calculate machining error by inspecting the finished part on the machine, returning machining errors to controller to carryout compensation. The post-line task is to carryout CAI (Computer Aided Inspection), inspecting the finished part. In this stage, inspection using a CMM (Coordinate Measurement Machine) is used to make a comparison between the result and the geometry model in order to perform compensation. The compensation is executed by modifying tool Compensation or by doing post operations such as re machining and grinding. Reverse engineering, meaning that the shape of the part is measured and a geometric model based on the measured data is generated, is included in this stage. As mentioned above, through three stages, it is possible for machine tools not only to satisfy high accuracy and productivity but also to machine parts with complex shape as well as simple shapes. Because CNC machines can machine a variety of parts by changing the part program and repetitively machine the same part shape by storing part programs, CNC machines can be used for general purposes.
Wednesday, October 2, 2019
Attempting to Understand Eliezer Wieselââ¬â¢s Night :: Eliezer Wiesel Night
Attempting to Understand Eliezer Wieselââ¬â¢s Night Night is a story about a young boy's life during the Holocaust. He uses a different name in the story, Eliezer. He comes from a highly Orthodox Jewish family, and they observed the Jewish traditions. His father, Shlomo, a shopkeeper, was very involved with the Jewish community, which was confined to the Jewish section of town, called the shtetl. In 1944, the Jews of Hungary were relatively unaffected by the catastrophe that was destroying the Jewish communities of Europe in spite of the infamous Nuremberg Laws of 1935-designed to dehumanize German Jews and subject them to violence and prejudice. The Holocaust itself did not reach Hungary until 1944. In Wiesel's native Sighet, the disaster was even worse: of the 15,000 Jews in prewar Sighet, only about fifty families survived the Holocaust. In May of 1944, when Wiesel was fifteen, his family and many inhabitants of the Sighet shtetl were deported to the Auschwitz concentration camp in Poland. The largest and deadliest of the camps, Auschwitz was the site of more than 1,300,000 Jewish deaths. Wiesel's father, mother, and little sister all died in the Holocaust. Wiesel himself survived and immigrated to France. His story is a horror story that comes to life when students in high school read this novel. Even though many students have not witnessed or participated in such horror, they relate to the character because Wiesel is their age. They cannot believe someone went through the nightmare he did at their age. This book focuses on many themes: conflict, silence, inhumanity to others, and father/son bonding. We see many, too many, conflicts this young man faces. Eliezer struggles with his faith throughout the story. He believes that God is everywhere, and he can't understand how God could let this happen, especially as Eliezer faces conflict everyday in the concentration camp. He also learns silence means. He says he says it is God's silence that he doesn't understand. He feels that God's silence demonstrates the absence of divine compassion. Another silence that drive confuses Eliezer is the silence of the victims. He cannot understand why they don't fight back, especially with the inhumanity that is forced upon them. It is because of this inhumanity that he loses faith, not only in God but also in men. He tells how at the beginning, the Germans were "distant but friendly." However, when they reach the camps, the soldiers are transformed from men to monsters.
Caring :: essays research papers
Since I was a little girl, I have been giving care to others. It started when I was nine years old. My grandmother, who was a heavy smoker, developed cancer and became very sick.. It got to the point where she received home hospice care because nothing more could be done for her in the hospitals. ââ¬Å"Hospice is a specialized type of medical care for people who have advanced or life-limiting illness. This care is provided by a team of individuals who care for patients and families in their homesâ⬠(1). It basically provides the patient with care in the comfort of their home. A hospital bed was set up in our home where she spent her last days. She was hooked up to an I.V. where she would receive daily doses of morphine, a strong drug ment to ease the pain of the terminally ill. I would check on her frequently, and even learned how to program the machine that released her morphine. à à à à à Soon after my grandmother died, my mom started getting sick. When she was born, she was born with a heart condition. Her heart had a ââ¬Å"holeâ⬠in it and it was positioned wrong in her chest. In fact, it was said by doctors that because of her abnormal heart condition, she wouldnââ¬â¢t live past the age of six. She was also partially blind in her left eye, which restricted her from driving. As she got older and older, her heart grew weaker and weaker. At the age of 35 years old, she had a pacemaker surgically implanted in her chest. A pacemaker is a battery-powered case that assists the heart in beating. An incision is made and a pocket is formed in the area overlying the muscle on the outside of the chest wall. ââ¬Å"Most are placed to prevent the heart from going to slow. This happens because there is no cell in the heart that will beat fast enough to maintain proper function or because the electrical pathway, which allows impulses to spread to the necessary parts of the heart muscle is damaged.â⬠(2). Eventually, even the pacemaker didnââ¬â¢t help. Her heart couldnââ¬â¢t handle the aging process, and it became more and more difficult for her to do simple, everyday activities. Even walking became a chore. I would do my part by helping out at home with the daily chores and push her around in her wheelchair whenever we went places.
Tuesday, October 1, 2019
Patient Confidentiality in the Emergency Department Essay
Confidentiality and privacy are words used interchangeably in the medical world when they have very different meanings. Confidentiality is in line with protection of patient information from unauthorized users and privacy is in line with protection of the patientââ¬â¢s physical body from unauthorized users. In the emergency department (ED) this is a lofty and constant task that requires vigilance from staff, in all departments, involved with the patient. This student will report on the issues with confidentiality in the ED. Describe the issue and the population it affects most. There are many issues with confidentiality in the ED but this student believes that the overcrowding and ââ¬Å"the growth in the subspecialty of Hallway Medicineâ⬠(Freeman, 2003, p. 1) is an enormous problem facing emergency departmentââ¬â¢s (EDââ¬â¢s). Hallway medicine happens when an ED has full rooms and the hallway gets employed as a waiting or staging area for the overflow patients. Emergency room visits by patients are not just for emergencies anymore. The ED is becoming more like an urgent care setting. As more patients cannot pay for the medical care, they need a higher utilization of the ED is happening because the ED cannot refuse to treat a patient. This is causing an influx of patient volume. Because most EDââ¬â¢s have not had the opportunity to rebuild or redesign the patient rooms to single person rooms the use of curtains separating patientââ¬â¢s is still widely used. Some precautions have been instituted by widening the space between beds and using portable dividers there is still an issue with maintaining patientââ¬â¢s confidentiality. Poor division between patients and overcrowding of EDââ¬â¢s can create a sense of no privacy for the necessary communication between patient and provider to happen. Patients will use the ED for a variety of ailments. If the patient feels that they may be overheard by someone other than his or her provider, he or she most likely will withhold medical history or information that the provider would need to help diagnose and treat the current problem. Supporting facts According to Moskop, Marco, Larkin, Geiderman, and Derse (2005), ââ¬Å"Of the 104 patients in the latter study reported that their expectations for privacy in the ED were met, 4 patients (all in curtained treatment areas) reported withholding part of their medical history, refusing part of their examination, or both because of privacy concernsâ⬠(Moskop et al 2005, p. 1). When patients believe that someone who is not providing care directly to them can hear the intimate details of his or her medical issue he or she will most likely not share the entirety of the details. If the patient is a celebrity, he or she will not want to share too much information for fear that the ED visit information will be sold or leaked to the press or paparazzi. Possibly, there is a family member with the patient. This person does not need to know the full extent of the patientââ¬â¢s medical issues. These are valid confidentiality concerns that hamper the ability of the ED physician to treat the patient. Ethical and Legal Issues The ethical issues are never-ending when dealing with patientsââ¬â¢ confidentiality while in the ED. The emergency department has some slightly different issues to deal with in emergent or trauma situations the need to maintain the patientsââ¬â¢ confidentiality are still prevalent. ED physicians have to be wary of several possibilities that can affect the course of an ED visit. The safety of patients and staff is always a top priority. Depending on mental status, the severity of the injury or illness, placing the patient in a single person room or closer to the nursesââ¬â¢ station may be necessary to maintain safety. Law enforcement officers may need to have access to the patient to get the details of an accident or retrieve evidence. The officers have, in some instances, the ability to access the patients because the transportation to the ED by law enforcement. Protecting the medical record is of high importance. No matter who has access to the patient the medical record must be kept confidential and not laying around for anyone to see. Legal issues around confidentiality can be just as important. Patients can record the actions of the staff in the ED. Smart phones have increased the patientââ¬â¢s or family memberââ¬â¢s ability to document what is said and the actions made by the providers. This may help a legal case if the patient has a valid complaint. The facility also has to make the medical record safe and confidential. If the medical record is on paper, then there needs to be restricted access to the area where the records are. If the medical record is electronic, safeguards in the computer programming need to shut down and lock the screen after a short period on inactivity. Managerial responsibilities related to administrative ethical issues In the article, there was no relation to managerial responsibilities. This student believes that education to the staff as regularly as possible is the best way to make sure all staff understand the high level of confidentiality to be maintained in the ED. There should be no compromise when accessing the patientsââ¬â¢ medical record. Regular training for the staff will be a big step in the right direction. Reaching out to ancillary departments and outside resource, law enforcement officers, to coordinate the teaching of confidentiality within patient access would also create a unity between the different people who may have access to the patient. Solutions Proposed solutions for maintaining confidentiality in the ED begin with making the patient feel that the space he or she are in during his or her ED visit is an audibly secure. This becomes a challenge for established older ED where curtains are still used to create a privacy barrier. One solution would be to use all individual rooms first, before using the curtained rooms. This removes any confidentiality issues at the beginning of the visit. If only curtained rooms are available space the patients in every other curtained room until it is necessary to start using the rooms in between. Another solution may be to have portable walls that roll into place to give an added layer of sound barrier. ââ¬Å"In an area where multiple patient-staff communications routinely occur, use of cubicles, dividers, shields, curtains, or similar barriers may constitute a reasonable safeguardâ⬠(ââ¬Å"Using barriers,â⬠2002, p. 6). Conclusion In the emergency department, a patientââ¬â¢s visit can be very hectic and have different people discussing the patients care and care needs to be taken to ensure the patientââ¬â¢s confidentiality. The patient needs to feel comfortable to share his or her health history so that the physician can make the best informed decision for the patientââ¬â¢s treatment. The patientsââ¬â¢ medical record needs to be kept secure whether in a restricted area or with software that shuts down after not used for a short period. Creating an audibly secure area for the patient will help create a better ED visit for the patient.
Subscribe to:
Posts (Atom)